VALID C_TS414_2023 EXAM TRAINING MATERIAL & COST-EFFECTIVE C_TS414_2023 PDF FILES

Valid C_TS414_2023 exam training material & cost-effective C_TS414_2023 PDF files

Valid C_TS414_2023 exam training material & cost-effective C_TS414_2023 PDF files

Blog Article

Tags: C_TS414_2023 Latest Study Guide, Passing C_TS414_2023 Score Feedback, C_TS414_2023 Actual Exam, New C_TS414_2023 Exam Duration, C_TS414_2023 Reliable Exam Sims

Almost no one likes boring study. Teachers and educationist have tried many ways to solve this problem. Arousing the interest might be the most effective method. So our company is focused on reforming preparation ways of the C_TS414_2023 exam. Rigid memory is torturous and useless. Our C_TS414_2023 Study Materials combine the knowledge with the new technology, which could greatly inspire your motivation. And if you click on our C_TS414_2023 practice questions, you will feel the convenience.

SAP C_TS414_2023 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Quality Planning: The topic explains the configuration requirements of Quality Planning.
Topic 2
  • Quality Inspection: It explains the configuration requirements of Quality Inspection.
Topic 3
  • Quality Management in Procurement and Inventory Management: It focuses on the integration of QM integrates with Procurement and Inventory Management.
Topic 4
  • Quality Management in Sales and Distribution: The topic describes the integration of QM with Sales and Distribution.

>> C_TS414_2023 Latest Study Guide <<

Passing C_TS414_2023 Score Feedback | C_TS414_2023 Actual Exam

We have the free demo for the C_TS414_2023 study guide, it will help you to have a better understanding of the exam dumps, if you decide to buy and pay for it, we will send the downloading link and password to you within 10 minutes, and if you don't receive it, please contact to our service stuff, we will deal with the problem for you immediately. What's more, free update for the C_TS414_2023 Study Guide for 365 days, and the update version will send to you by email automaticially, therefore you can have the latest information for the SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management.

SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management Sample Questions (Q16-Q21):

NEW QUESTION # 16
You must assign a certificate profile for outgoing certificates to a key combination. What key combination can be used without additional settings?

  • A. Material, Customer, Material Group
  • B. Material/Customer, Material, Material Group
  • C. Material/Customer, Material, Material Type
  • D. Customer, Material, Material Group

Answer: C


NEW QUESTION # 17
Which QM basic data can be used in the material specification? Note: There are 3 correct answers to this question.

  • A. Sampling procedures
  • B. Inspection methods
  • C. Dynamic modification rule
  • D. Master inspection characteristics
  • E. Selected set

Answer: A,B,D

Explanation:
Material specifications in SAP QM (transaction QS61) define inspection requirements directly in the material master, independent of task lists. They integrate specific QM basic data:
* Master Inspection Characteristics (A): MICs are the core of material specifications, defining what is inspected (e.g., length, pH). They are assigned to the material spec to set tolerances or qualitative codes.
* Sampling Procedures (C): These determine the sample size for the material spec's characteristics (e.g., fixed sample of 5). They are assigned to MICs within the material specification.
* Inspection Methods (E): Inspection methods (e.g., "Visual check") can be linked to MICs in the material spec to specify how the inspection is performed.
* Dynamic Modification Rule (B): This governs inspection scope changes (e.g., skip lots) and is assigned to inspection types or plans, not material specs directly.
* Selected Set (D): Selected sets are used for qualitative valuations (e.g., UD codes) but are not directly assigned to material specs; they link via MICs instead.
Thus, "Master inspection characteristics," "Sampling procedures," and "Inspection methods" are the correct answers.References: SAP Help Portal - "Material Specifications in QM"; SAP S/4HANA QM User Guide -
"Basic Data".


NEW QUESTION # 18
Which inspection origin creates only unplanned physical samples?

  • A. 15 sample management
  • B. 16 stability study
  • C. 2 goods issue
  • D. 3 production

Answer: A


NEW QUESTION # 19
You post a goods receipt for a purchase order item. A quality certificate is mandatory for the material, but no goods receipt inspection lots should be created. What will happen if the required certificate is not provided?

  • A. The goods receipt is posted to blocked stock
  • B. A quality notification is created automatically
  • C. The missing certificate is escalated
  • D. The goods receipt is posted to unrestricted use stock

Answer: A

Explanation:
When a quality certificate is mandatory (set in the quality info record, transaction QI01) but no GR inspection lot is created (inspection type 01 inactive in the material master), the system handles the missing certificate as follows:
* The Goods Receipt is Posted to Blocked Stock (B): If the certificate is required (e.g., "Certificate Check" active in QI01) and not received (transaction QC55), the GR (transaction MIGO) posts the material to blocked stock (movement type 103/105 process). This is standard behavior to prevent unrestricted use until the certificate is confirmed, even without an inspection lot (SPRO > QM > Quality Certificates > Procurement > DefineControl Keys).
* Unrestricted Use Stock (A): This would occur only if no certificate check was enforced, contradicting the premise.
* Quality Notification Created Automatically (C): Notifications require manual creation or specific Customizing (e.g., defect recording), not automatic generation here.
* Missing Certificate Escalated (D): Escalation is not a standard SAP term or process in this context; it implies custom workflow not present in standard QM.
Thus, "The goods receipt is posted to blocked stock" is the correct answer.References: SAP Help Portal -
"Certificate Processing at Goods Receipt"; SAP S/4HANA QM User Guide - "Stock Posting".


NEW QUESTION # 20
Working area settings are mandatory for inspection planning within the engineering workbench. Which of the following are possible focuses for a working area? Note: There are 2 correct answers to this question.

  • A. Inspection characteristic
  • B. Header
  • C. Operation
  • D. Classification

Answer: B,C

Explanation:
The Engineering Workbench (EWB) in SAP S/4HANA is a powerful tool for managing task lists, including inspection plans, in a structured and efficient way. Working areas in the EWB define the focus or scope of what users can edit or view during inspection planning. These settings are mandatory to streamline workflows and ensure the correct level of detail is maintained:
* Header (A): The header level refers to the overall inspection plan (e.g., plan group and group counter).
A working area focused on the header allows users to manage high-level attributes like validity dates or usage. This is a standard focus in EWB (transaction CEWB).
* Operation (B): Operations within an inspection plan define the steps or activities (e.g., "Measure dimension"). A working area focused on operations allows detailed planning at this level, including assigning control keys or work centers. This is another standard focus in EWB.
* Inspection Characteristic (C): While inspection characteristics (e.g., specific measurements) are part of an operation, they are not a standalone focus for a working area inEWB. They are managed within the operation context, not as a separate working area.
* Classification (D): Classification is used for categorizing objects (e.g., materials) but is not a focus for working areas in inspection planning within EWB. It's unrelated to this context.
Thus, "Header" and "Operation" are the correct focuses, aligning with EWB's structure for inspection planning.References: SAP Help Portal - "Engineering Workbench in QM"; SAP S/4HANA QM User Guide -
"Inspection Planning with EWB".


NEW QUESTION # 21
......

If you choose our C_TS414_2023 exam question for related learning and training, the system will automatically record your actions and analyze your learning effects. simulation tests of our C_TS414_2023 learning materials have the functions of timing and mocking exams, which will allow you to adapt to the exam environment in advance and it will be of great benefit for subsequent exams. After you complete the learning task, the system of our C_TS414_2023 Test Prep will generate statistical reports based on your performance so that you can identify your weaknesses and conduct targeted training and develop your own learning plan. For the complex part of our C_TS414_2023 exam question, you may be too cumbersome, but our system has explained and analyzed this according to the actual situation to eliminate your doubts and make you learn better.

Passing C_TS414_2023 Score Feedback: https://www.dumpsquestion.com/C_TS414_2023-exam-dumps-collection.html

Report this page